As the attachment ,
- missed device by network discovered enabled share at property and discover center ?
- other hand , disabled shared devices keep displayed at the network quick access ?
Would this imply some of devices at Virtual environment , or vm copying ? How to tell and remove
Diagram map :
Modem.firbre --- Sg(vlan default ) ---- Rv (vlan enabled unable removed )---- PCs
Sincerely
.
Good morning Team. I'm newbie in Virtualization and I came across with something and I need your help. It may be something easy for some people but for me it's a question.
What happens is that I'm setting up a testing network virtualization. I have a server which static IP address is:
10.0.2.5 /24
and Connection-specific DNS Suffix: (THERE'S NOTHING HERE)
There's nothing wrong with this server, but I also have a windows 10 client and in its IP configuration it's connecting via DHCP through the server but when I type ipconfig, where it says Connection-specific DNS Suffix: it's showing information from my physical LAN, it's showing the domain name of my physical LAN. So I don't know if this is right, which I don't think it is but I need your thoughts about this.
Thanks in advance.
Hi,
Not able to start the Virtual machine after configured vSAN getting the below error, we have 2 physical host, and 1 storage. i'm trying to do configure SQL failover cluster in the VM, so shared storage planning to attach from storage. created the lun in the storage and created virtual san in the Hyper v manager and assigned the vSAN in fiber channel adapter in the VM. but when trying to start the VM i'm getting the below error.
Regards,
Manikandan
Hello,
I am looking in my environment for a virtual Linux host that, according to its MAC address, is hosted on a Hyper-V machine running W2K8. The guest responds to ping and and MAC shows up in the range of MACs assigned in the Virtual Network Manager.
Yet, the machine is not visible in the Hyper-V manager (which is only holding six guests).
I'm thinking that in some manner the guest is hidden, but the Virtual Machine folders show nothing strange.
We have 3 VMs running on a VM Host we need to create a fourth Win10. We downloaded windows.iso (Win10) to the local machine and then copied across to the Host machine using XCOPY /v/f the Host machine reported 4,137,088 KB (same size as original download. We then pointed the DVD to the ISO but as the machine starts we get "Boot Failure. Reboot and select proper boot device. Or insert boot media in selected boot device". I also tried using windows explorer - here I can see the folder and I can drag and drop the file to the Host but copying is very slow indeed. I assume that despite the /v flag that something has been lost in transmission to the Host. So my question is how can I get the iso directly on to the Host (I am very weak on Powershell commands) to avoid having to copy it across from the current local location to the remote host?
Thanks for any guidance. Jean
Hi
I started working at a new company and the first week onsite I was met with a Virtual server that is running out of space.
There is 3 snapshot files that are consuming all the space. I cannot merge these deleted snapshots with the Virtual hard drive as there is only 32GB of data left on the drive.
I was thinking of making a full data backup up to the last minute of the data disk and then deleting the snapshot files and mount only the data disk and restore the data files from backup.
I have tried creating a new snapshot and deleting it again to see if that would help, but the virtual server justa starts to merge and then run out of space. Attached is the drive as is with the snapshot files.
When I edited the virtual server in Hyper v, I saw that the D-Drive(Data) was mounted from the snapshot?
Would appreciate any advice as space is a problem and I cannot see any other solution.
Regards
Pieter
Hi, I have one big problem to create disks in my Hyper-V, show this error when I creating a new HardDisks.
And when I imput this server to a Cluster, I can not receive any VMs.
Microsoft Engineer,
The screenshot next is the windows 10 pro prompted , when installing personal Anti program . Is it jumped out from Blocking of Microsoft defender ? As my Anti engineer says, once the installing done , the defender of Microsoft would auto be disabled.
error
1) "please insert last disk of mutli- volume set ... " ? what is it ?
2) "Virus thread is from Denfender " ?
3) "Shall neglect the Option of Action APP " if using the personal Anti ?
4) Protection history is started by Defender to installing personal ANTI processing , not ANTI itself ?
5) etc....
I'm copy/pasting this from the regular MS forums as suggested by a moderator. I view this as more of a host OS issue than a Hyper-V issue personally, but defer to the experts.
So, it's taken me a while to track down exactly what process was causing this. I've attached the first evidence I've found as to what process is causing this problem.
This is a virtual Windows 10 Pro 1903 installation on a Server Datacenter 2016 Hyper-V host. Around 3 months ago (not sure exactly, but certainly not long after we approved the update to 1903) this system began not checking in to WSUS and when I would look into the issue, Hyper-V manager would report the VM was using about 12% of the processor, which translates into 100% in the virtual environment. Requests to remote in would time out, and connecting through Hyper-V Manager would show the lock screen, but it was unable to proceed through logon. The only way to get it to respond is to reset the virtual machine, after which it starts up normally. However, it could freeze again in as little as 15 minutes, or it could take over a day, without any discernible pattern.
This system is used to host the only Java installation we have on campus, which it needs to access HVAC controls for our campus, as well as monitor some of our wireless access points. Other than the browser, and Java, there is no additional software (except for that which I've downloaded for troubleshooting since the beginning of this issue). The system had been working fine for over a year with only regular updates being done. As it's a VM, there's no physical hardware for which drivers could be out of date.
Since the time between system startup and hang appear to be somewhat random, it's not usually possible to notice when it hangs. In the case of the screenshot attached, it froze after I left, but before the problem VM's lock screen came on. I left screen sharing software running in the hopes of catching it in the act and finally succeeded. This freeze apparently happened 7 minutes after I walked away from my desk today.
Any suggestions for this one? Certainly it's possible to just reinstall from scratch, but if a solution exists, I'd rather find that than just keep nuking and paving the VM every time it decides to try to turn into a space heater.
Best wishes,
Roy
Since it's not a verified account, the screenshot is available at this post:
https://answers.microsoft.com/en-us/windows/forum/windows_10-performance/w10-1903-in-vm-hanging-with-system-process-using/0c30370e-823a-41f1-bdfc-37c685ee001b?tm=1572380956433
We have two web servers running on IIS/ ASP .NET Core. one of the server runs fine but the other one fails to load the .aspnetcore and gives 500 error
Below is the event viewer log
Faulting application name: w3wp.exe, version: 8.5.9600.16384, time stamp: 0x5215df96
Faulting module name: ucrtbase.DLL, version: 10.0.14393.2990, time stamp: 0x5caeb96f
Exception code: 0xc0000409
Fault offset: 0x000000000006cba8
Faulting process id: 0x1441c
Faulting application start time: 0x01d57f9e5ef2519c
Faulting application path: c:\windows\system32\inetsrv\w3wp.exe
Faulting module path: C:\Windows\SYSTEM32\ucrtbase.DLL
Report Id: 9cdcdb66-eb91-11e9-8124-00155d562602
Faulting package full name:
Faulting package-relative application ID:
Will Wind River VXWorks IPnet TCP/IP STACK Vulnerabilities remediation affect Windows OS in any way?
Thanks!
Hi guys,
I'm doing a new setup of two hosts and shared storage. I want to cluster the servers, and asking whether i should create the AD on one host before clustering, then add both hosts to the new AD VM. i don't have any AD yet, and cluster validation require the hosts to be connected to a domain. The domain-less cluster don't support live migration, which will be a feature I'll need in the new environment,
I have server 2019 standard with just the hyper-v role installed. It will have 2 server 2019 standard guests running on it. We purchased 1 volume license (this will cover the 2 VM OSs). The documentation stated that if the Host only has the hyper-v role installed, it does not require a license.
Question: How do I activate 2019 os on the Host.
Hello,
I have windows 2012 DC edition running on a Hyper-v node. I would like to know if i install server 2016 virtual machine and run it on this hyper-v server, whether the licensing for this 2016 will be covered under the 2012 DC license or separate license will be required for the 2016
Hi all,
We have made a RDS Farm to deploy a Virtual App. After configuring the roles, we have this structure:
server 1 and 2 are in DMZ VLAN, and server 3, 4 and 5 in midd VLAN. To publish our public DNS, we use a pool into VIP F5 that balance the connections with Round Robin mode and assign a static public IP to this DNS.
All roles are in HA: RD bróker have a DNS RR register with the server 1 and 2 IP, RDGateway is duplicated on both servers, RD Web Access and IIS is installed on both servers and the RDSH role is blanacing via RDBokrer service.
The question is: Is possible to check the health status of every role (RD Gateway, RD Bróker and RD Web Access) to remove of the F5 pool the machine when some role is out of service in a server1 or 2 ?
Thanks!
Gerardo,
Hello,
I have configured Windows Server 2012 and Active Directory. Now I just want to check by the CMD console all users and their accessess to all network drive which we have in the company. I know that exist a command to do that and export a list of all those rights.
I will be gratefull.
Thanska!
Dear all,
I'm using Hyper-V guests on a Windows 10 Enterprise, Build 17134. Guests are connected to Host via external switch for sharing internet connection and additionally an internal switch (other purposes).
Initally, internet connection was very slow on host, but after searching the forums, I disabled VMQ in the switches and Large Send Offload Version 2 (IPv4 and IPv6) and internet speed was back to usual, almost.
But whenever I start a VPN (pulse secure) connection on the host, internet connection is incredibly slow again. Spped for destinations part of VPN is reasonable, but as soon as I want to access internet through VPN it's incredibly slow.
Any help on this is greatly appreciated!
Storage space is full and I could not login to the server. I want to increase the storage space and current space it is showing is 85 GB. This virtual server running on core server and Hyper V installed on the Domain Controller.
Please help.
Thank you