Not sure if I posted in the correct forum, but here is the problem I have:
I currently have two nic's cards configured on the server
Nic 1 going to 192.168.x.x
Nic 2 going to 10.1.x.x
I built a virtual switch for the 192 network and the vswitch is showing the correct ip address from the nic card. I can ping and the vm's have full access to the network
I also built a vswitch for the 10.x network. When I look at the Ethernet virtual adaptor, I see the correct ip address that was originally configured on the nic
However, when I do an IP config, the IP address showing is a 169.254.x.x. I lose connection to that segment completely.
any thoughts?